IPDB module

Basically, IPDB is a transactional database, containing records, representing network stack objects. Any change in the database is not reflected immediately in OS (unless you ask for that explicitly), but waits until commit() is called. One failed operation during commit() rolls back all the changes, has been made so far. Moreover, IPDB has commit hooks API, that allows you to roll back changes depending on your own function calls, e.g. when a host or a network becomes unreachable.

IPDB vs. IPRoute

These two modules, IPRoute and IPDB, use completely different approaches. The first one, IPRoute, is synchronous by default, and can be used in the same way, as usual Linux utilities. It doesn’t spawn any additional threads or processes, until you explicitly ask for that.

The latter, IPDB, is an asynchronously updated database, that starts several additional threads by default. If your project’s policy doesn’t allow implicit threads, keep it in mind.

The choice depends on your project’s workflow. If you plan to retrieve the system info not too often (or even once), or you are sure there will be not too many network object, it is better to use IPRoute. If you plan to lookup the network info on a regular basis and there can be loads of network objects, it is better to use IPDB. Why?

IPRoute just loads what you ask – and loads all the information you ask to. While IPDB loads all the info upon startup, and later is just updated by asynchronous broadcast netlink messages. Assume you want to lookup ARP cache that contains hundreds or even thousands of objects. Using IPRoute, you have to load all the ARP cache every time you want to make a lookup. While IPDB will load all the cache once, and then maintain it up-to-date just inserting new records or removing them by one.

So, IPRoute is much simpler when you need to make a call and then exit. While IPDB is cheaper in terms of CPU performance if you implement a long-running program like a daemon. Later it can change, if there will be (an optional) cache for IPRoute too.


Simple tutorial:

from pyroute2 import IPDB
# several IPDB instances are supported within on process
ip = IPDB()

# commit is called automatically upon the exit from `with`
# statement
with ip.interfaces.eth0 as i:
    i.address = '00:11:22:33:44:55'
    i.ifname = 'bala'
    i.txqlen = 2000

# basic routing support
ip.routes.add({'dst': 'default', 'gateway': ''}).commit()

# do not forget to shutdown IPDB

Please, notice ip.release() call in the end. Though it is not forced in an interactive python session for the better user experience, it is required in the scripts to sync the IPDB state before exit.

IPDB uses IPRoute as a transport, and monitors all broadcast netlink messages from the kernel, thus keeping the database up-to-date in an asynchronous manner. IPDB inherits dict class, and has two keys:

>>> from pyroute2 import IPDB
>>> ip = IPDB()
>>> ip.by_name.keys()
['bond0', 'lo', 'em1', 'wlan0', 'dummy0', 'virbr0-nic', 'virbr0']
>>> ip.by_index.keys()
[32, 1, 2, 3, 4, 5, 8]
>>> ip.interfaces.keys()
>>> ip.interfaces['em1']['address']
>>> ip.interfaces['em1']['ipaddr']
[('', 23),
 ('2620:52:0:2282:f2de:f1ff:fe93:940d', 64),
 ('fe80::f2de:f1ff:fe93:940d', 64)]

One can address objects in IPDB not only with dict notation, but with dot notation also:

>>> ip.interfaces.em1.address
>>> ip.interfaces.em1.ipaddr
[('', 23),
 ('2620:52:0:2282:f2de:f1ff:fe93:940d', 64),
 ('fe80::f2de:f1ff:fe93:940d', 64)]

It is up to you, which way to choose. The former, being more flexible, is better for developers, the latter, the shorter form – for system administrators.

The library has also IPDB module. It is a database synchronized with the kernel, containing some of the information. It can be used also to set up IP settings in a transactional manner:

>>> from pyroute2 import IPDB
>>> from pprint import pprint
>>> ip = IPDB()
>>> pprint(ip.by_name.keys())
>>> ip.interfaces.lo
{'promiscuity': 0,
 'operstate': 'UNKNOWN',
 'qdisc': 'noqueue',
 'group': 0,
 'family': 0,
 'index': 1,
 'linkmode': 0,
 'ipaddr': [('', 8), ('::1', 128)],
 'mtu': 65536,
 'broadcast': '00:00:00:00:00:00',
 'num_rx_queues': 1,
 'txqlen': 0,
 'ifi_type': 772,
 'address': '00:00:00:00:00:00',
 'flags': 65609,
 'ifname': 'lo',
 'num_tx_queues': 1,
 'ports': [],
 'change': 0}

transaction modes

IPDB has several operating modes:

  • ‘direct’ – any change goes immediately to the OS level
  • ‘implicit’ (default) – the first change starts an implicit transaction, that have to be committed
  • ‘explicit’ – you have to begin() a transaction prior to make any change
  • ‘snapshot’ – no changes will go to the OS in any case

The default is to use implicit transaction. This behaviour can be changed in the future, so use ‘mode’ argument when creating IPDB instances.

The sample session with explicit transactions:

In [1]: from pyroute2 import IPDB
In [2]: ip = IPDB(mode='explicit')
In [3]: ifdb = ip.interfaces
In [4]: ifdb.tap0.begin()
    Out[3]: UUID('7a637a44-8935-4395-b5e7-0ce40d31d937')
In [5]: ifdb.tap0.up()
In [6]: ifdb.tap0.address = '00:11:22:33:44:55'
In [7]: ifdb.tap0.add_ip('', 24)
In [8]: ifdb.tap0.add_ip('', 24)
In [9]: ifdb.tap0.review()
    {'+ipaddr': set([('', 24), ('', 24)]),
     '-ipaddr': set([]),
     'address': '00:11:22:33:44:55',
     'flags': 4099}
In [10]: ifdb.tap0.commit()

Note, that you can review() the last() transaction, and commit() or drop() it. Also, multiple self._transactions are supported, use uuid returned by begin() to identify them.

Actually, the form like ‘ip.tap0.address’ is an eye-candy. The IPDB objects are dictionaries, so you can write the code above as that:

ip.interfaces['tap0']['address'] = '00:11:22:33:44:55'

context managers

Also, interface objects in transactional mode can operate as context managers:

with ip.interfaces.tap0 as i:
    i.address = '00:11:22:33:44:55'
    i.ifname = 'vpn'
    i.add_ip('', 24)
    i.add_ip('', 24)

On exit, the context manager will authomatically commit() the transaction.

interface creation

IPDB can also create interfaces:

with ip.create(kind='bridge', ifname='control') as i:
    i.add_ip('')  # the same as i.add_ip('', 24)

Right now IPDB supports creation of dummy, bond, bridge and vlan interfaces. VLAN creation requires also link and vlan_id parameters, see example scripts.

routing management

IPDB has a simple yet useful routing management interface. To add a route, one can use almost any syntax:

# spec as a dictionary
spec = {'dst': '',
        'oif': 4,
        'gateway': '',
        'metrics': {'mtu': 1400,
                    'advmss': 500}}

# pass spec as is

# pass spec as kwargs

# use keyword arguments explicitly
ip.routes.add(dst='', oif=4, ...).commit()

To access and change the routes, one can use notations as follows:

# default table (254)
# change the route gateway and mtu
with ip.routes[''] as route:
    route.gateway = ''
    route.metrics.mtu = 1500

# access the default route

# change the default gateway
with ip.routes['default'] as route:
    route.gateway = ''

# list automatic routes keys

performance issues

In the case of bursts of Netlink broadcast messages, all the activity of the pyroute2-based code in the async mode becomes suppressed to leave more CPU resources to the packet reader thread. So please be ready to cope with delays in the case of Netlink broadcast storms. It means also, that IPDB state will be synchronized with OS also after some delay.


class pyroute2.ipdb.IPDB(nl=None, mode='implicit', restart_on_error=None)

The class that maintains information about network setup of the host. Monitoring netlink events allows it to react immediately. It uses no polling.

create(kind, ifname, reuse=False, **kwarg)

Create an interface. Arguments ‘kind’ and ‘ifname’ are required.

  • kind – interface type, can be of: * bridge * bond * vlan * tun * dummy * veth
  • ifname – interface name
  • reuse – if such interface exists, return it anyway

Different interface kinds can require different arguments for creation.


To properly create veth interface, one should specify peer also, since veth interfaces are created in pairs:

with ip.create(ifname='v1p0', kind='veth', peer='v1p1') as i:

The code above creates two interfaces, v1p0 and v1p1, and adds two addresses to v1p0.


VLAN interfaces require additional parameters, vlan_id and link, where link is a master interface to create VLAN on:



The link parameter should be either integer, interface id, or an interface object. VLAN id must be integer.


Possible tuntap keywords:

  • mode — “tun” or “tap”
  • uid — integer
  • gid — integer
  • ifr — dict of tuntap flags (see tuntapmsg.py)

Restart IPRoute channel, and create all the DB from scratch. Can be used when sync is lost.

register_callback(callback, mode='post')

IPDB callbacks are routines executed on a RT netlink message arrival. There are two types of callbacks: “post” and “pre” callbacks.


“Post” callbacks are executed after the message is processed by IPDB and all corresponding objects are created or deleted. Using ipdb reference in “post” callbacks you will access the most up-to-date state of the IP database.

“Post” callbacks are executed asynchronously in separate threads. These threads can work as long as you want them to. Callback threads are joined occasionally, so for a short time there can exist stopped threads.


“Pre” callbacks are synchronous routines, executed before the message gets processed by IPDB. It gives you the way to patch arriving messages, but also places a restriction: until the callback exits, the main event IPDB loop is blocked.

Normally, only “post” callbacks are required. But in some specific cases “pre” also can be useful.


The routine, register_callback(), takes two arguments: 1. callback function 2. mode (optional, default=”post”)

The callback should be a routine, that accepts three arguments:

cb(ipdb, msg, action)
  1. ipdb is a reference to IPDB instance, that invokes the callback.
  2. msg is a message arrived
  3. action is just a msg[‘event’] field

E.g., to work on a new interface, you should catch action == ‘RTM_NEWLINK’ and with the interface index (arrived in msg[‘index’]) get it from IPDB:

index = msg['index']
interface = ipdb.interfaces[index]

Shutdown IPDB instance and sync the state. Since IPDB is asyncronous, some operations continue in the background, e.g. callbacks. So, prior to exit the script, it is required to properly shutdown IPDB.

The shutdown sequence is not forced in an interactive python session, since it is easier for users and there is enough time to sync the state. But for the scripts the release() call is required.


Main monitoring cycle. It gets messages from the default iproute queue and updates objects in the database.


Should not be called manually.


Utility function to get NLA, containing the interface address.

Incosistency in Linux IP addressing scheme is that IPv4 uses IFA_LOCAL to store interface’s ip address, and IPv6 uses for the same IFA_ADDRESS.

IPv4 sets IFA_ADDRESS to == IFA_LOCAL or to a tunneling endpoint.

  • msg (nlmsg): RTM_.*ADDR message
  • nla (nla): IFA_LOCAL for IPv4 and IFA_ADDRESS for IPv6

Table Of Contents

Previous topic

IPRoute module

Next topic

NetNS, network namespaces support

This Page